Product Description
TechSouth Saw Guides for Tube Cutting1/2" - 1.25" Capacity AvailableSG-500, SG-750, SG-1000, SG-2500Nickel Chrome Plated Hardened Steel Easy to Use with PortaBand, Sawzall or Hack Saw| Easy Setup | The wing nut design allows the guide to be locked onto the tube withoutthe use of external devices. Just wrap the guide around the pipe and tighten the wing nut for the cutting operation. |
| Roll-pin | A hardened solid pin is inserted into the guide just below the finished cut line that will stop the saw blade from cutting into the guide. If the saw blade comes in contact with the pin, the pin will spin and not damage the saw blade or the guide. |
| Nickel Plated | The hardened steel saw guide is nickel plated to insure non-contamination of the pipe or tube. |
| Double Slot | (Patent Pending) Double slot guide has two slots. Narrow for a portaband and wider one for a sawzall blade. This is to ensure that the tolerances are kept tighter on the cut on the ½" thru 3.5" sizes. The 4" and 6" have single slots. |
| Rounding | The design of the guides also allows it to be used as a rounding clamp in certain applications. |
| Sizes | Sizes are available from ½" to 6" in both pipe and tube sizes. See separate listing for pipe sizes. |
| Tube Sizes | Pipe Sizes | ||
|---|---|---|---|
| Size | Part Number | Size | Part Number |
| ½" Tube | SG-500T | ½" Pipe | SG-500P |
| ¾" Tube | SG-750T | ¾" Pipe | SG-750P |
| 1.0" Tube | SG-1000T | 1" Pipe | SG-1000P |
| 1.250" Tube | SG-1250T | 1.250" Pipe | SG-2500P |
| 2" Tube | SG-2000T | 2" Pipe | SG-2000P |
| 2-½" Tube | SG-2500T | 2-½" Pipe | SG-2500P |
| 3" Tube | SG-3000T | 3" Pipe | SG-3000P |
| 4" Tube | SG-4000T | 4" Pipe | SG-4000P |
| 6" Tube | SG-6000T | 6" Pipe | SG-6000P |
