Product Description
ROBO Gas Flow Tester 191.0013R Argon / Co2Take Control of Shielding Gas Costs!Test Gas Flow Rate at the TorchHere's the simple, low cost, way to test every welder and gas flow regulator in your shop to save big on wasted gas. Do it using our GFT style gas flow gauge / checker!
Welding Gas Is Expensive - STOP Wasting It! With the wire feed drive roll open hold the Gas Flow Checker boot against the end of the weld gun nozzle and position the acrylic tube upright, then, activate the welding gun. Gas flowing through the gun pushes the stainless steel ball up the acrylic tube.Gas flow rates are read on the scale printed on the acrylic tube Argon / Co2 / Nitrogen in LPM (LPM / .472 = CFH) ** May be used with semi-automatic torches as well, ideal for facilities with both robotic and semi-automatic welding operations This is a great way to test for gas regulator accuracy at the same time.GFT Measures the actual flow of shielding gas at the MIG / TIG torch nozzle, allowing adjustments to be made at the cylinder gauge if necessary. GFT - An economical solution for improving overall welding performance. This easy-to-use device will take the guesswork out of optimizing.
your welds and save on shield gas cost. For production applications the benefits of documenting flow rates
at the torch – will pay off with reduced weld variations and
lower gas usage. The Unit Measures Argon and Co2 Flow Rates up to 25 L/ min (53 Cu Ft / h)Measures in Liters/Per Minute. To Convert L per min to Cu Ft, Divide - L/ min by .472 = Cu Ft / h
Examples: 3 L/ min = 6.4 Cu Ft / h
5 L/ min = 10.5 Cu Ft / h
10 L/ min = 21.0 Cu Ft / h
15 L/ min = 31.8 Cu Ft / h
20 L/ min = 42.4 Cu Ft / h
25 L/ min = 53.0 Cu Ft / h
Easy to use in Robotic Applications.
