Saw Guide TUBE Cutting 1-1/2"

TechSouth Saw Guides for Tube Cutting

1.5" - 2.5" Capacity Available

SG-1500T, SG-2000T, SG-2500T

Nickel Chrome Plated Hardened Steel

Easy to Use with PortaBand, Sawzall or Hack Saws

Easy Setup	The wing nut design allows the guide to be locked onto the tube without the use of external devices. Just wrap the guide around the pipe and tighten the wing nut for the cutting operation.
Roll pin	A hardened solid pin is inserted into the guide just below the finished cut line that will stop the saw blade from cutting into the guide. If the saw blade comes in contact with the pin, the pin will spin and not damage the saw blade or the guide.
Nickel Plated	The hardened steel saw guide is nickel plated to insure non-contamination of the pipe or tube.
Double Slot	(Patent Pending) Double slot guide has two slots. Narrow for a Portaband and a wider one for a Sawzall blade. This is to insure that the tolerances are kept tighter on the cut on the ½" thru 3.5" sizes. The 4" and 6" have single slots.
Rounding	The design of the guides also allows it to be used as a rounding clamp in certain applications.
Sizes	Sizes are available from ½" to 6" in both pipe and tube sizes. See separate listing for pipe sizes.

Saw Guide Video: https://youtu.be/51iy3ZPAlE8

HS Code: 7307.99.4000

Write a Review

Saw Guide TUBE Cutting 1-1/2" - 2-1/2"