We accept : Pay Pal Visa MasterCard Discover American Express
Search Results
Found 11 product(s) for Robot Welding (1-11 of 11)
Robot Welding Robotic Mig Welding torches require components be maintained for best performance and repeatability of each welding pass. Nozzles, contact tips and insulators must remain free of weld spatter build up. Weld spatter build up can cause false arc starts, poor penetration, weld porosity and possible system shut down. Any work stoppage can be costly as it usually means the shut down of the complete line.
Mig Nozzle Cleaning Station. Mig Nozzle Cleaning Station with Anti-Spatter Spray Unit designed to maintain quality and productivity in your MIG welding cell by removing spatter build-up in the gas nozzle. Long life reamer blades along with powerful pneumatic motor provide fast and efficient cleaning. Adjustable feed rate provides optimal cleaning results. Adjustable V-Block allows for all nozzle sizes. One move of the Robot torch completes a full cleaning cycle in less than 6 seconds. Each system Includes: One Reamer blade per your specification, spatter catch pan, anti-spatter fluid reservoir and control connector plug. Compatible with all Robotic systems and all brands of welding torches. Sinking or sourcing control setup. No PC boards to fail - DOES NOT require special "V" blocks for various nozzles, direct drive reamer - no drive belts to fail. Small footprint allows for installation in confined spaces. Minimal Robot programming required. Requires 24vdc and 90-125 psi. Shop air, single air line connection. Available options include: 30" Floor Stand, Wire Cutter and FRLAirControlCenter. Professional installation is available. The AE-SC2CV nozzle cleaning stations are also available nationwide at authorized Robot Integrators, OEM Robot Suppliers and local Welding Distributors. More details at www.torchguard.com . Mig nozzle cleaning station for robotic applications usually ships next business day.
Price: $2,785.00 Retail: $3,550.00 You Save:$765.00
Welding Wire Cutter - Pneumatic wire cutter designed to trim cut welding wire at the nozzle of the Robotic Mig weld gun. Clean cut wire help ensure arc starts. Cuts wire sizes up to 1/16" (.062", 1.6mm) diamater. The welding wire cutter may be activated by Robot signal or torch movement. This welding wire cutter may be used as a stand alone item or it can be mounted directly on the Sentry Torch Gusrd cleaning station.
Mig Nozzle Cleaning Station for Robotic Mig Welding Aluminum applications uses a nozzle brush to remove weld spatter from the gas shield nozzle and contact tip. Extends the life of your robotic MIG torch and improve cycle time in your robotic welding cell. Full cleaning cycle in less than 6 seconds. Compatible with all brands of Robots and Robotic Welding Torches. The universal clamping system adjusts to all nozzle sizes. Nozzle cleaning station system includes: Cleaning brush, debris catch pan, air filter, air regulator and air luricator. Mig Nozzle Cleaning Station Optional wire cutter and floor stand are available.
Price: $2,520.50 Retail: $3,250.00 You Save:$729.50
Anti Spatter dispenser commonly used with nozzle cleaning stations produced by Intertech, CMI, Cloos and various others. Used with SC2 and SC4 style systems and may be integrated with other cleaning stations. Anti spatter system holds approximately 1/2 liter of oil based or water based anti spatter fluid and has an adjustable output to control the amount of spray coverage required. 1/4 fittings, max pressure 230 psi. (16 bar) temp. 120 F (50C). 8 3/8" high 3 1/2" wide. Anti spatter spray system usually ships the next business day.
Wire Cutter Blades for Robotic wire cutter. These hardened steel blades cut welding wire cleanly to ensure better arc starts and less down time for robotic welding torches. Supplied 2 blades per pack. Use with AEWI, Intertech, CM-Industries, Cloos, Fronius, Thielmann, OCIM, PDA92 systems.
Nozzle Reamer Motor. FRONIUS® STYLE REAMER BLADE MOTOR for Robacta® Reamer system 44.0450.1148. Motor has Anti-Spatter spraying through the reamer blade. Replaces Fronius® reamer blade motor, part #44.0450.1194.
Anti-Spatter Water Based Robotic Spray Compound 398 is a Safe and enviromentaly friendly alternative to solvent based anti-spatter for use in automatic injection systems. Anti-Spatter 398 is Formulated to protect Robotic nozzles and contact tips during welding operation. Will not damage most gaskets, seals, tubing or reservoirs. Use in accordance with robotic torch manufacturers recommendations. Water Based Anti-Spatter Robotic Compound Ready to use, 4 gallons per case.
Anti-Spatter Solvent Based Robotic 396 is formulated to protect Robotic nozzles and contact tips from spatter build-up during welding operations. For use in automatic anti-spatter / nozzle protectant injection systems. Will not damage gaskets, seals and reservoirs. Ready-to-use in accordance with Robotic Torch Cleaner Manufacturer's recommendations. Solvent Based Anti Spatter 396 comes 4 x 1 Gallon containers per case.
Welding Nozzle Reamer Blade "A" style (single blade) may be use with AEWI, Intertech, CMI, Tregaskiss, Abicore / Binzel, Wire Wizard and Fronius Robotic Nozzle Cleaning Stations. They may also be used with Lincoln Power Ream, Tregaskiss and Nasarc Intelliream, however, a thread adaptor (Part #100.3824M) is required. Select a Reamer blade with an OD. that is 1mm (.040") LESS than the ID of the Gas nozzle used and with an ID. 1mm (.040") LARGER than the contact tip used.
Welding Nozzle Reamer Blade "B" style (dual blade) may be use with AEWI, Intertech, CMI, Tregaskiss, Abicore / Binzel, Wire Wizard and Fronius, Robotic Nozzle Cleaning Stations. They may also be used with Lincoln Power Ream, Tregaskiss and Nasarc Intelliream, however, a thread adaptor (Part #100.3824M) is required. Select a Reamer blade with an OD. that is 1mm (.040") less than the ID of the Gas nozzle used and with an ID. 1mm (.040") larger than the contact tip used.
AEWI (Arndt Enterprise Ltd.) Is not affiliated with any of the named manufacturers but is a full-service distributor. Any reference to named equipment, machines, torches, welding guns or accessories and part numbers is for your convenience only. Parts advertised for sale and indicated as original equipment manufacturer (OEM) parts, are sourced directly from the original manufacturers. All other items and parts are directly interchangeable and meet AEWI’s quality and performance requirements. Photographs or drawings are for reference only to illustrate fit, form & function. All prices are in US dollars and are subject to change without notice. Details on Policies, Shipping, Returns and Damage or Free Delivery may be found on our Information page.
