Search Results

Air Filter, Air Regulator, Air Lubricator FRL is designed for use with Robotic Nozzle Cleaning Stations and other Pneumatic tools and devices. Improves the life and performance of air operated equipment by removing damaging air line moisture and providing the necessary lubrication for the tool. Filters incoming air, regulates air pressure and injects a controlled amount of oil to output side. Air Filter Regulator Lubricator FRL 202.110 ships the next business day.

Price: $107.14
Retail: $142.85
You Save: $35.71

Welding Wire Cutter - Pneumatic wire cutter designed to trim cut welding wire at the nozzle of the Robotic Mig weld gun. Clean cut wire help ensure arc starts. Cuts wire sizes up to 1/16" (.062", 1.6mm) diamater. The welding wire cutter may be activated by Robot signal or torch movement. This welding wire cutter may be used as a stand alone item or it can be mounted directly on the Sentry Torch Gusrd cleaning station.

Price: $447.50
Retail: $526.47
You Save: $78.97

Anti Spatter dispenser commonly used with nozzle cleaning stations produced by Intertech, CMI, Cloos and various others. Used with SC2 and SC4 style systems and may be integrated with other cleaning stations. Anti spatter system holds approximately 1/2 liter of oil based or water based anti spatter fluid and has an adjustable output to control the amount of spray coverage required. 1/4 fittings, max pressure 230 psi. (16 bar) temp. 120 F (50C). 8 3/8" high 3 1/2" wide. Anti spatter spray system usually ships the next business day.

Price: $108.00
Retail: $135.00
You Save: $27.00

Wire Cutter Blades for Robotic wire cutter. These hardened steel blades cut welding wire cleanly to ensure better arc starts and less down time for robotic welding torches. Supplied 2 blades per pack. Use with AEWI, Intertech, CM-Industries, Cloos, Fronius, Thielmann, OCIM, PDA92 systems.

Price: $23.80
Retail: $28.00
You Save: $4.20

Air Motor 36mm Outside Diamater for nozzle cleaning system reamer blade fits AEWI, Bernard, Cloos, CM-Industries, Fronius, Intertech, Thielmann and Weldquip. Optimum performance 1500 to 2000 rpm obtained with clean, dry, lubricated compressed air supplied at 90-125 psi.

Price: $535.00
Retail: $669.00
You Save: $134.00

Air Motor 36mm Outside Diamater with anti-spatter center spray for nozzle cleaning system reamer blade. Fits AEWI, Cloos, CM-Industries, Fronius, Intertech and Thielmann. Optimum performance 1500 to 2000 rpm obtained with clean, dry, lubricated compressed air supplied at 90-125 psi.

Price: $565.00
Retail: $706.25
You Save: $141.25

Air Motor 42mm Outside Diamater for nozzle cleaning system reamer blade. Fits CM-Industries and Intertech. Optimum performance 1500 to 2000 rpm obtained with clean, dry, lubricated compressed air supplied at 90-125 psi.

Price: $559.50
Retail: $668.75
You Save: $109.25

Air Motor 42mm Outside Diamater with center spray anti-spatter for nozzle cleaning system reamer blade. Fits CM-Industries and Intertech. Optimum performance 1500 to 2000 rpm obtained with clean, dry, lubricated compressed air supplied at 90-125 psi. Air motor for nozzle cleaning station reamer blade availibility; Usually ships the next business day.

Price: $589.50
Retail: $706.25
You Save: $116.75

Air Motor, Fronius® Style Reamer Blade Motor for Robacta® Reamer system 44.0450.1148. Standard wo/spraying. Replaces Fronius® part #44.0450.1194.

Price: $535.00
Retail: $669.00
You Save: $134.00

Nozzle Reamer Motor. FRONIUS® STYLE REAMER BLADE MOTOR for Robacta® Reamer system 44.0450.1148.  Motor has Anti-Spatter spraying through the reamer blade. Replaces Fronius® reamer blade motor, part #44.0450.1194.

Price: $565.00
Retail: $664.75
You Save: $99.75

Air Motor, Nozzle Reamer Blade Motor 38mm diameter. Replaces standard OEM Abicore® Binzel® pneumatic motor 831.0088. Spatter shield and reamer blades are sold separately. Use with ABICORE BINZEL TCS-LC, TCS-PP, TCS-6, TCS-6PP, BRS-FP, BRS-CC and BRS-LC systems.

Price: $535.00
Retail: $629.43
You Save: $94.43

Air Motor Nozzle Reamer Blade Motor 38mm diameter. This optional motor has "Spray through Blade" anti-spatter feature. Replaces standard OEM Abicore® Binzel® motor 831.0088. Nozzle reamer blade air motor is used with ABICORE® - BINZEL® TCS-LC, TCS-PP, TCS-6, TCS-6PP, BRS-FP, BRS-CC and BRS-LC robotic nozzle cleaning systems.

Price: $565.00
Retail: $664.75
You Save: $99.75

Welding Nozzle Reamer Blade "A" style (single blade) may be use with AEWI, Intertech, CMI, Tregaskiss, Abicore / Binzel, Wire Wizard and Fronius Robotic Nozzle Cleaning Stations. They may also be used with Lincoln Power Ream, Tregaskiss and Nasarc Intelliream, however, a thread adaptor (Part #100.3824M) is required. Select a Reamer blade with an OD. that is 1mm (.040") LESS than the ID of the Gas nozzle used and with an ID. 1mm (.040") LARGER than the contact tip used.

Price: $68.00
Retail: $135.00
You Save: $67.00

Welding Nozzle Reamer Blade "B" style (dual blade) may be use with AEWI, Intertech, CMI, Tregaskiss, Abicore / Binzel, Wire Wizard and Fronius, Robotic Nozzle Cleaning Stations. They may also be used with Lincoln Power Ream, Tregaskiss and Nasarc Intelliream, however, a thread adaptor (Part #100.3824M) is required. Select a Reamer blade with an OD. that is 1mm (.040") less than the ID of the Gas nozzle used and with an ID. 1mm (.040") larger than the contact tip used.

Price: $68.00
Retail: $135.00
You Save: $67.00

Nozzle reamer blade Binzel style. Welding nozzle reamer blades fit all Binzel systems including BRS-LC, BRS-FP, TCS-6. Select the nozzle reamer blade for your application based on nozzle id. and contact tip od. The reamer blade od. should be 1mm smaller than the id. of the gas nozzle used. The id. of the reamer blade should be 1mm larger than the contact tip used. These dimensions assure proper clearance for efficient, safe cleaning. Welding nozzle reamer blade to replace OEM reamer blade on Binzel cleaning stations are precision ground and hardened for high performance and long life.

Price: $89.00
Retail: $130.00
You Save: $41.00

Nozzle reamer blade holder Binzel 831.0139 style. Nozzle holder has 3/8-24 internal thread and mounts to reamer drive motor with 3/8-24 male thread. Allows the use of Binzel style reamer blades having M24 x 1.5mm thread with other robotic welding nozzle cleaning stations. 

Price: $46.00
Retail: $69.00
You Save: $23.00

Tregaskiss style welding nozzle reamer blades are precision ground and hardened for high performance and long life. Select the reamer blade for your cleaning station application from the menu. Tregaskiss ® style welding nozzle reamer blades, made in the USA.

Price: $68.00
Retail: $135.00
You Save: $67.00

Reamer Blade Cloos® Style select ID & OD for application. "Sure Sharp" blade made in Germany. Precision cut and hardened for extended life.

Price: $68.00
Retail: $135.00
You Save: $67.00

Reamer Blade Fronius® Robacta® Style used with Robacta® Reamer 44.0450.1148 select ID & OD for application. "Sure Sharp" blade made in Germany. Precision cut and hardened for extended life.

Price: $68.00
Retail: $135.00
You Save: $67.00